We have long informative pages. You'll learn much
more by scrolling down & clicking the links found
within.Visit
linked Price Chart Pages before requesting a
Quote. THANKS!
Legacy Line Cast Plaques Mounting Methods
Brass
Rod Stake Mount:
Special mounting brackets are cast in place on the back of the casting to
accommodate a 24" x 3/8" threaded brass rod. Stake mounts can be angled 45°
for positioning plaque at an angle. $62 per plaque.
Garden Stake:
Bronze stake measuring 24" x 1-1/2" and attached to back of plaque with
10-24 machine screws. Stake is painted black or to match the background color of the
plaque. These mounts can be angled 30°. Max. plaque size for either
mount:12" x 8".
Recommended
uses:
Mounting
into ground
For
plaques 12" or less in width
Maximum
plaque size 12" x 8"
Recommended
uses:
Mounting
into ground
For
flat-backed plaques 3/8" thick
Maximum
plaque size is 12" x 8" for 1 stake or 20" x 8" for 2 stakes.
Square Post Back Mount:
Black enamel-coated steel square post attaches to the back of a cast plaque
with machine screws. Size of Post Mount corresponds to the size of
Square Inch plaque.
3/4" X 48" Post: Up to 100 plaque SI: $92
1" x 60" Post: 80-250 plaque SI: $104
1 1/2" X 80" Post: 200-450 plaque SI: $116
2" X 80" Post: Over 450 plaque SI: $158
Integral
Post Cap Mount:
A post cap is a decorative sleeve cast integral with the bottom of a plaque
to mount onto a round post. Post caps are available in several standard
designs to accommodate 1-1/2" or 2" inner diameter posts. Add $380 to
plaque price.
Recommended uses:
Freestanding
installation into the ground on a single post
For
plaques greater than 12" in width
For
double-faced plaques with copy on both sides
Strap Mount:
Plaque pricing changes from standard sizes to per-square-inch pricing,
and adds $380 per plaque.
Standard is two straps per plaque. Available for 4" OD, 3" OD, and 2" OD
poles.
3/4" X 48" Post: Up to 100 plaque SI: $92
